LFS-75DMX User Manual Page 11 of 17
4. OPERATION
To access the control panel functions, use the four buttons located underneath the
display.
Button Function
<MODE/ESC> Selects an operation mode or backs out of the current menu option
<UP> Scrolls up the list of options or selects a higher value
Scrolls down the list of options or selects a lower value
<ENTER> Activates a menu option or a selected value
DMX Address d001—d512 Selects the DMX starting address
Manual Mode MAN
CoLr Co00—Co17 Color wheel
CoSP CP00—CP63
Color scroll speed
(when CoLr is set to Co16 or Co17)
dimm L000—L255 Dimmer (0—100%)
Shutter speed (slow to fast)
Display
Normal display
rdiS Inverted display
Displays LED temperature in Celsius
Load LoAd Loads factory defaults
(DMX)
Set the product in DMX mode to control with a DMX controller.
1. Move the position of the voltage selection switch to the appropriate input voltage.
2. Connect the product to a suitable power outlet.
3. Connect a DMX cable from the DMX output of the DMX controller to the DMX input
socket on the product.
When selecting a starting DMX address, always consider the number of DMX channels
the selected DMX mode uses. If you choose a starting address that is too high, you could
restrict the access to some of the product’s channels.
The LFS-75DMX uses up to 4 DMX channels in its 4-channel DMX mode, which defines
the highest configurable address to 509.
If unfamiliar with DMX, download the DMX Primer from www.chauvetlighting.com
.
To select the starting address, do the following:
1. Press <MODE/ESC> repeatedly until d001—d512 shows on the display.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to select the starting address.
4. Press <ENTER>.
Commentaires sur ces manuels