Chauvet Q-Spot 200 Manuel d'utilisateur télécharger pdf (Page 16)

Operation

12 Q-Spot™ 360-LED User Manual Rev. 4

Product Settings

Pan/Tilt Speed

1. Select SETTINGS > PERFORM > PT SPEED.

a. Select FAST for fast movement or SLOW to use the normal speed.

b. Press <ENTER>.

Reverse Pan Direction

1. Select SETTINGS > PERFORM > PAN INV.

2. To reverse the pan direction, press <ENTER>.

a. Select INVERT to reverse the pan direction or NORM to use the normal pan

direction.

b. Press <ENTER>.

Reverse Tilt Direction

1. Select SETTINGS > PERFORM > TILT INV.

2. To reverse the tilt direction, press <ENTER>.

a. Select INVERT to reverse the tilt direction or NORM to use the normal tilt

direction.

b. Press <ENTER>.

Reverse Dimmer Direction

1. Select SETTINGS > PERFORM > DIM INV.

2. To reverse the dimmer direction, press <ENTER>.

a. Select INVERT to reverse the dimmer direction or NORM to use the normal

dimmer direction.

b. Press

<ENTER>

Optics Speed

3. Select SETTINGS > PERFORM > OP SPEED.

a. Select FAST for fast movement or SLOW to use the normal speed.

b. Press <ENTER>.

Head Motion Blackout

1. Select SETTINGS > PERFORM > BLACK D.

2. To black out the output when the head moves, press <ENTER>.

a. Select INSTANT to black out the output when the head tilts or pans, or

DELAY to keep the output on while the head moves.

b. Press

<ENTER>

Dimmer Curve

1. Select SETTINGS > PERFORM > DIMMER.

2. To set the dimming curve, press <ENTER>.

a. Select DIM4 (slowest) to DIM1 (Fastest) or OFF (linear).

b. Accept the selected option.

Loss Of Signal

1. Select SETTINGS > PERFORM > DMXERROR.

2. To choose what happens to the product when signal is lost, press <ENTER>.

a. Select BLACK to blackout the output during signal loss or SAVE to keep the

last output when the signal was lost.

b. Press

<ENTER>

Product Reset

1. Select SETTINGS > PERFORM > DMXRESET.

2. To choose whether to reset the product from the control panel or the DMX controller

press <ENTER>.

a. Select DMX to reset the product from a DMX controller or DISPLAY to reset

the product from the control panel.

b. Press

<ENTER>

Display Backlight

1. Select SETTINGS > PERFORM > DISPLAY.

2. To choose how long the backlight stays on after the last action is performed on the

control panel, press <ENTER>.

a. Select LONG, SHORT, or ALWAYS.

b. Press <ENTER>.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 27 28

Commentaires sur ces manuels

Pas de commentaire

Chauvet Q-Spot 200 Manuel d'utilisateur Page 16

Commentaires sur ces manuels

Produits connexes et manuels pour Lumières des projecteurs Chauvet Q-Spot 200