Chauvet Intimidator COLOR LED Manuel d'utilisateur

User Manual

5. Appendix 10 1/12/2011 3:28 PM 5. APPENDIX General Troubleshooting SYMPTOM POSSIBLE CAUSE(S) POSSIBLE ACTION(S) Breaker/Fuse keeps blowin

5. Appendix 11 1/12/2011 3:28 PM DMX Primer There are 512 channels in a DMX connection. A fixture capable of receiving DMX will require one or

5. Appendix 12 1/12/2011 3:28 PM Cable Connectors Cabling must have a male XLR connector on one end and a female XLR connector on the other end

5. Appendix 13 1/12/2011 3:28 PM 3-Pin to 5-Pin Conversion Chart If you use a controller with a 5-pin DMX output connector, you will need to u

5. Appendix 14 1/12/2011 3:28 PM General Maintenance To maintain optimum performance and minimize wear, fixtures should be cleaned frequently.

TECHNICAL SPECIFICATIONS WEIGHT & DIMENSIONS Length ...

CONTACT US WORLD WIDE General Information ... CHAUVET® Addr

CHAUVET®, 2011, All Rights Reserved Information and specifications in this User Manual are subject to change without notice. CHAUVET® assumes no respo

1. Before You Begin 3 1/12/2011 3:28 PM 1. BEFORE YOU BEGIN What is included • 1 x Intimidator™ Color LED • 1 x Power Cord • 1 x Warranty

1. Before You Begin 4 1/12/2011 3:28 PM Safety Instructions • Please keep this User Manual for future consultation. If you sell the unit

2. Introduction 5 1/12/2011 3:28 PM 2. INTRODUCTION Product Overview Power Out Microphone Sensitivity Bracket Adjustment Bracket Adjus

3. Setup 6 1/12/2011 3:28 PM 3. SETUP AC Power This fixture is auto-ranging and runs on 100~240 VAC, 50/60 Hz power. To determine the powe

3. Setup 7 1/12/2011 3:28 PM Mounting Orientation The Intimidator™ Color LED may be mounted in any position provided there is adequate room f

4. Operating Instructions 8 1/12/2011 3:28 PM 4. OPERATING INSTRUCTIONS Configuring the Starting Address The Intimidator™ Color LED fixture

4. Operating Instructions 9 1/12/2011 3:28 PM DMX Channel Values CHANNEL VALUE FUNCTION 1 000 ó 219 220 ó 239 240 ó 255 Color Wheel Speed/M