Chauvet Techno Strobe 168 Manuel d'utilisateur télécharger pdf (Page 10)

Page 10 of 16 Techno Strobe™ 168 User Manual (Rev. 2)

4. OPERATION

Configuration

(DMX)

Set the product in DMX mode to control with a DMX controller.

1. Connect the product to a suitable power outlet.

2. Connect a DMX cable from the DMX output of the DMX controller to the DMX input

socket on the product.

Starting Address

When selecting a starting DMX address, always consider the number of DMX channels

the selected DMX mode uses. If you choose a

starting address that is too high, you could

restrict the access to some of the product’s channels.

The Techno Strobe™ 168 uses up to 2 DMX channels in its 2-channel personality DMX

mode, which defines the highest configurable address to 511. The DMX

starting address

is configured through the DIP switches located on the back panel.

If unfamiliar with DMX or DIP switches, download the DMX Primer from

www.chauvetlighting.com.

Starting Address

Settings

DIP Switch 1 2 3 4 5 6 7 8 9

Value 1 2 4 8 16 32 64 128 256

Select the desired starting address by setting DIP switches [1]~[9] to On or Off

until the

sum of the value of the DIP switches in the On

position matches the desired address

number.

Refer to the examples below for more information.

Starting Address

Examples

1. To select DMX address 1, set DIP switch [1] to On.

2. To select DMX address 64, set DIP switch [7] to On.

3. To select DMX address 31, set DIP switches [1], [2], [3], [4], and [5] to On.

(1 + 2 + 4 + 8 + 16 = 31)

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16

Pas de commentaire

Chauvet Techno Strobe 168 Manuel d'utilisateur Page 10