Chauvet Tiger DMX 60 Manuel de l'opérateur télécharger pdf (Page 40)

Page 32 - 6. Memories

Pearl 2008 Manual - 16th July 2007

only the colour information for 4 of the fixtures into the programmer.

You could then “include” position information from another memory into

the programmer, and build up a new memory using information from

several existing memories.

Using Include

 Press the Include button.

 Select the fixtures from which you want to take settings. If you

don’t select any fixtures, all fixtures will be used.

 Select the Attributes you want to include. The Dimmer attribute will

include all other attributes (the lights on the buttons show which

attributes will be loaded).

 Press the Swop button for the memory you want to include.

 The selected attributes of the selected fixtures will be loaded into

the programmer.

You can Include an entire memory by ensuring no fixtures are selected

and selecting the Dimmer attribute.

If the memory you are including contains shapes, the shapes and all

the fixtures they are applied to will be loaded, whether they are

selected or not.

Include is also useful when you are programming chases, which is

described in the next section.

6.11 Setting fade times for a memory

You can set a fade in and fade out time independently for every

memory. The fades only affect HTP (intensity) channels, and are set

using softkey C for fade in and D for fade out. There is also a separate

LTP timer which allows you to set movement times for fancy sweeps or

colour fades, set using softkey E.

Setting fade times for a memory

 Press C [Edit Time].

 Press the Swop button of the playback you want to set times for

 The display shows you the times you can set.

 Press C to set Fade In time, or D to set Fade Out time.

 Use the numeric keypad to enter the new time. Press Enter to save

it.

 Press Enter when you have finished. If you press Exit, the changes

you have made will not be stored.

There are some other timing functions available as well, which are

described in the reference manual.

6.12 Record by fixture, record by channel modes

Normally, if you change one attribute of a fixture, the Pearl records all

the other attributes of that fixture even if you haven’t changed those

attributes. So if you change the pan position, the Pearl will also record

the tilt, colour, gobo, iris, and so on. However, the Pearl also has a

more selective mode of operation where it only records the changed

attributes. You can choose the mode by holding down the Avo button

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 205 206

Commentaires sur ces manuels

Pas de commentaire

Chauvet Tiger DMX 60 Manuel de l'opérateur Page 40

Commentaires sur ces manuels